fb

Overhead Pole Design Analysis in AUD

  • Home
  • Post
  • Overhead Pole Design Analysis in AUD

[vc_row][vc_column width=”1/6″][/vc_column][vc_column width=”2/3″][vc_row_inner][vc_column_inner][vc_column_text]

 

Automated Utility Design™ (AUD) rules-based design validates all standards, spans and guying during a design to ensure they are in compliance with your organization’s standards. On occasion you may need to do a detailed structural analysis of a pole during design. Our Utility Data Hub™ (UDH) module UDH-Design-Analysis can accomplish that.

Check out this video that shows AUD sending data to SPIDAcalc for analysis and back to AUD to complete a design.

For more information please visit: https://ieng.tech
or send us email at: enquiries@iengaust.com.au[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][vc_column width=”1/6″][/vc_column][/vc_row]

Leave A Comment